HP NetServer AA 6200, Administrator'S Manual, Page: 224 / 272

9-8 HP Netserver AA Solution Administrator’s Guide
Shutting Down a CE
To shut down a CE:
Shutting Down the CE Operating System
Before you shut down the CE operating system, consider the fact that this procedure removes
your Endurance server from service. Make sure that you schedule an appropriate time and that
you have completed any necessary backups
before starting this procedure.
To shut down the CE operating system, you can go to the system and shut it down using these
steps:
Using the Endurance Manager, you can also shut down the CE operating system remotely. In
that case, locally on a CE or IOP, or on a remote system, issue the CE OS Shutdown command
to shut down the CE operating system.
Step Action Notes
1 Make sure that the other CE is active . If the other CE is not active , shutting down the
only active CE removes the Endurance server
from service.
2 From Endurance Manager issue the
CE
x Disable Operation command.
3 Power off the CE if desired. A disabled element will not attempt to rejoin the
server.
Step Action Notes
1 Make sure that the keyboard and
mouse are available at the CE. If necessary, enter the hotkey sequence to
switch control to the CE operating system.
2 Shut down Windows. Be sure not to have Windows restart after you
shut it down.