manualshive.com logo in svg

HP NetServer AA 6200, Administrator'S Manual, Page: 2 / 272

Share
Download
HP NetServer AA 6200 Administrator'S Manual Download Page 2

ii

                                             

N O T I C E

The information contained in this document is subject to change without notice. 
Hewlett-Packard makes no warranty of any kind with regard to this material, including, but not limited to, the 

implied warranties of merchantability and fitness for a particular purpose. 
Hewlett-Packard shall not be liable for errors contained herein or for incidental or consequential damages in 

connection with the furnishing, performance, or use of this material. 
Hewlett-Packard assumes no responsibility for the use or reliability of its software on equipment that is not 

furnished by Hewlett-Packard. 
This document contains proprietary information that is protected by copyright. All rights are reserved. No part 

of this document may be photocopied, reproduced, or translated to another language without the prior written 

consent of Hewlett-Packard Company.

TR A D E M A R K   N O T I C E

Assured Availability, ComputeThru, Computing for the long run, Constant Computing, Endurance, Marathon 

Assured, MIAL, SplitSite, and the Marathon logo are either registered trademarks or trademarks of Marathon Tech-

nologies Corporation in the United States and/or other countries.
Microsoft, MS-DOS, Windows, Windows NT, and Windows 2000 are either registered trademarks or trademarks of 

Microsoft Corporation in the United States and/or other countries. 
All other brands and product names are trademarks of their respective companies or organizations.

SOFTWARE REVISION

The revision of the Endurance software that this document supports is Revision 4.0.0-RL.EA.

Hewlett-Packard Company
Network Server Division
Technical Communications MS 45SLE
10955 Tantau Avenue
Cupertino, California 95014 USA

ã

 Copyright 2001, Hewlett-Packard Company 

Summary of Contents for NetServer AA 6200

















































































































































































































































































Reviews:

No comments