HP NetMail/3000 User Manual Download | Manualshive

Page: 92 / 102

background image

NetMail/3000 Menu Interface

Users Guide

2-92

MultiMedia Installation and Setup

To process multimedia messages on your PC, special software is required. This software is

provided with NetMail/3000, and will install automatically for you once you tell it to.

To tell NetMail/3000 that you want the multimedia software installed on your PC, you

need to add a special “variable” to your AUTOEXEC.BAT file, somewhere before the line that
invokes MS Windows (if you run Windows from your AUTOEXEC.BAT -- if not, then anywhere
in the file will do). To install NetMail/3000’s multimedia software on your PC, add the following
line to your AUTOEXEC.BAT :

SET NETMAILMM=C:\NETMAIL

You may substitute another drive or directory if required (C:\NETMAIL is just the recom-

mended value). You must have WRITE access to this directory, as NetMail/3000 will download
both executable files and some special data files to this directory, and will also create a subdirec-
tory within this directory (\TEMP) to save temporary download files while processing mail. Net-
Mail/3000 will automatically CREATE the directories for you if they don’t exist.

The full compliment of NetMail/3000 software downloaded to the PC takes less than

250K bytes of space; so you’ll need to ensure that you have at least this much free space available
on the drive you designated for the NETMAILMM directory (above). Note though, that if you
plan to do any serious multimedia processing, you’re likely to encounter some rather large files.
These files get stored (at least temporarily) on the \TEMP directory within the NETMAILMM
directory you defined, so be prepared for potentially large intermediate files (depending on what
kind of multimedia you plan to deal with).

Now that you have the variable added to the AUTOEXEC.BAT file and have re-booted

your PC so the new configuration file takes effect, you need to run Reflection, log onto the
HP3000, and run NetMail/3000. You will see a notice printed on your screen that NetMail/3000 is
downloading files to your PC. Following that, you will see several file download boxes painted on
your screen as various files are transmitted from the HP3000 down to your PC. The amount of
time this takes depends on how fast your link to the HP3000 is; over a low-speed modem, this
download process may take quite a while (several minutes), while users connected over a local
area network using VTMGR then the whole process can only take a few seconds.

The downloads may take a little while, but they ONLY occur once. After that, NetMail/

3000 detects that the software is already installed and simply invokes it.

«
...
90
91
92
93
94
...
»

Summary of Contents for NetMail/3000







































































































Reviews:

No comments

Related manuals for NetMail/3000

PowerLine DHP-W611AV

Brand: D-Link Pages: 78

UR5i v2 Libratum

Brand: B+B SmartWorx Pages: 8

Brand: B+B SmartWorx Pages: 8

Brand: Garland Pages: 4

Brand: Vanguard Pages: 4

Brand: NetComm Pages: 3

RouterBOARD SXT 5HnD

Brand: MikroTik Pages: 2

Brand: Falcon Pages: 24

Brand: Fortinet Pages: 20

Brand: Paradyne Pages: 85

Brand: Lancom Pages: 25

Brand: EVOC Pages: 57

Fan Tray 8820-S2-900

Brand: Paradyne Pages: 6

Brand: Gemtek Systems Pages: 51

Brand: RubyTech Pages: 25

ExpressBox2 EB2

Brand: Magma Pages: 74

Brand: Westermo Pages: 34

Brand: IMC Networks Pages: 36

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands