N1200-320 4Gb Network Storage Router user and service guide
69
Maximum SCSI bus speed menu
This option allows for setting the maximum SCSI bus speed. When this option is selected, the user must first
select the Target ID for the bus before this menu appears.
Figure 44
SCSI bus speed configuration menu
•
Select
1
to set the maximum SCSI bus speed to Ultra320. This setting provides support for transfer rates
of up to 320 Megabytes per second. This is the default setting.
•
Select
2
to set the maximum SCSI bus speed to Fast-160. This setting provides support for transfer rates
of up to 160 Megabytes per second.
•
Select
3
to set the maximum SCSI bus speed to Ultra 2. This setting provides support for transfer rates of
up to 80 Megabytes per second.
•
Select
X
to return to the Target ID selection prompt where a different Target ID can be selected.
SCSI Bus Speed Configuration Menu
X.XX.XX XXXXXX XXXXXXXXXXXXXXXX
07/7/2005 08:56:22
Bus 0, Target 15 Current Configuration:
Maximum SCSI Bus speed set to Ultra320 (320 MB)
1) Set Maximum Speed to Ultra320: (320 MB)
2) Set Maximum Speed to Fast-160 (160 MB)
3) Set Maximum Speed to Ultra 2 (80 MB)
X) Return to previous menu
Summary of Contents for N1200 - StorageWorks Network Storage Router
