N1200-320 4Gb Network Storage Router user and service guide
47
Mapping menu
Accessed from the Main menu, the Mapping menu is used to create or edit LUN maps and assign them to
hosts. (see
Figure 27
).
Figure 27
Mapping screen
NOTE:
Indexed
,
Auto Assigned
, and
SCC
maps cannot be deleted or renamed.
NOTE:
SCC
and
Auto-Assigned
maps cannot be cloned.
Each physical port/bus on the network storage router can have the following maps:
Each map has a unique name and map ID; one of the maps must be identified as the
current
map.
Fibre Channel mapping tasks
Configuration tasks for Fibre Channel mapping includes:
•
Viewing and changing Fibre Channel map information
•
Viewing and changing Fibre Channel host information
Each task is discussed in the following paragraphs.
Table 4
Device map types
Map type
Generated by
Editable
Auto Assigned
System
No
Indexed (
default
)
System
Yes
Port 0 Device Map
System Generated/User Edited
Yes
SCC
System
No
Summary of Contents for N1200 - StorageWorks Network Storage Router
