HP J2962A, Installation And Reference Manual

Page: 14 / 36

2. Connect the RPS to Supported Devices
To connect the RPS to one or more devices, follow these steps:
1. Select up to four devices that need redundant power, for example,
the HP J2601B AdvanceStack 10Base-T Hub-24 or
the HP J2602B AdvanceStack 10Base-T Hub-48.
2. Notify the users on these devices that the network will be down
temporarily.
3. Disconnect the AC power cord from the selected device and store
the AC power cord.
4. Connect a DC cable (8120-6777) to the RPS and to the RPS connector
on the selected device. The following illustration shows the
HP Hub-48 connected to the RPS.
RPS
RPS AC power cords connected to an
operating AC power source
Hub-48
RPS DC cable
Installation Summary
8