HP J2962A, Installation And Reference Manual

Page: 12 / 36

Rack Mounting
W a r n i n g
The rack or cabinet should be adequately secured to prevent it
from becoming unstable and/or falling over.
1. Using a Phillips (cross-head) screwdriver, attach the mounting brack-
ets to the RPS with the 10-mm M4 screws included in the accessory
kit (5063-8522). The top of each bracket should align with the top of
the RPS. Be careful not to overtighten the screws.
2. Partially install a screw (5/8-inch number 12-24 included in the
accessory kit) in each rack upright. Ensure that the screws in each
upright are at the same level.
align top of bracket with top of RPS
10-mm M4 screws
Installation Summary
6