www.hp.com/enclosures
21
Setting the ID Window Dwell Time
This menu selection lets you set the time that the ID Window remains on
screen after a port switch. Each port can be configured independently. The
default time is set for five seconds.
1. Highlight the port you wish to change in the main OSD Window.
2. From the main OSD Window, press the
Ctrl
key twice to access the
Administrator Command Menu.
3. Select ‘Edit Port’ from the Command Menu.
4. Choose the option ‘ID Dwell Time’.
5. Enter a number between 0-255 seconds. Entering
0
disables the ID
Window. Entering
255
allows the ID Window to stay on screen the
entire time the port is active.
5. Press
Enter
to accept the changes or press
Esc
to exit the menu
without saving the changes.
On-Screen Display Operations
