www.hp.com/enclosures
19
Editing Port Names and Addresses
1. Highlight the port you wish to change in the main OSD Window.
2. Press the
Ctrl
key twice to access the Command Menu or press the
F2
key once. (If you press
F2
skip Step 3)
3. Select ‘Edit Port’ from the Command Menu.
4. Enter the new port name, address, ID Dwell time and Scan Dwell time.
Press
Enter
to accept.
5. After selecting “ID Setup”, use the arrow keys, position the ID window
to where you would like it to appear when this port is selected. Then
press
Enter
. (For further information see ‘The ID Window’ later in
this chapter.)
6. Select “Save Changes” and press
Enter
to accept.
Press
Esc
at any point to exit this operation without saving the changes.
Deleting an Existing Port
1. Highlight the port you wish to delete in the main OSD Window.
2. Press the
Ctrl
key twice to access the Command Menu or simply press
the
DELETE
key. (If you press
DELETE
skip Step 3)
3. Choose the ‘Delete Port’ option.
4. Type Y or N at the prompt to confirm the deletion and press
Enter
.
On-Screen Display Operations
