HP iPAQ 610 - Business Navigator, Product Manual

Page: 91 / 137

NOTE: For Auto pick option to be available, you need more than one connection.
Set up a WAP gateway
To access Wireless Access Point (WAP) sites through Internet Explorer, configure your device to use
a WAP gateway.
Before you begin, obtain the following information from your ISP or network administrator:
● User name
●
Password
●
ISP server phone number
●
WAP gateway server IP
●
Port number
To set up a WAP gateway:
1. Tap Start > Settings > Connections > Connections > Advanced > Select Networks > Edit…
to edit iPAQ WAP from the Programs that automatically connect to the Internet should
connect using list. If a proxy server has not been set up, tap New…
2. On the Proxy Settings tab, select the This network connects to the Internet and This network
uses a proxy server to connect to the Internet check boxes.
3. If necessary, in the Proxy server box, enter the proxy server name.
4. Tap Advanced > WAP .
5. In the Server box, enter the WAP gateway server name. Under Port , enter the port number. The
most common WAP port number is 9201.
6. Enter any logon credentials required by the WAP gateway server.
Configure advanced proxy settings
To configure advanced proxy settings:
1. Tap Start > Settings > Connections > Connections > Advanced > Select Networks > Edit…
to edit iPAQ WAP from the Programs that automatically connect to the Internet should
connect using list. If a proxy server has not been set up, tap New…
2. On the Proxy Settings tab, select the This network connects to the Internet and This network
uses a proxy server to connect to the Internet check boxes.
3. If necessary, in the Proxy server box, enter the proxy server name.
4. For the appropriate server type, enter the proxy server name and port.
5. If necessary, enter the credentials for connecting with your proxy server.
6. Tap Advanced > Socks .
7. Select Socks 4 or Socks 5 . If using Socks 5, enter the credentials for connecting with your proxy
server.
Advanced settings 81