HP HPE ProLiant DL365 Gen10 Plus Server Maintenance And Service Manual Download Page 127

Page: 127 / 185

UEFI System Utilities

The UEFI System Utilities is embedded in the system ROM. Its features enable you to perform a wide range of configuration activities,

including:

Configuring system devices and installed options.

Enabling and disabling system features.

Displaying system information.

Selecting the primary boot controller or partition.

Configuring memory options.

Launching other preboot environments.

HPE servers with UEFI can provide:

Support for boot partitions larger than 2.2 TB. Such configurations could previously only be used for boot drives when using RAID
solutions.

Secure Boot that enables the system firmware, option card firmware, operating systems, and software collaborate to enhance
platform security.

UEFI Graphical User Interface (GUI)

An Embedded UEFI Shell that provides a preboot environment for running scripts and tools.

Boot support for option cards that only support a UEFI option ROM.

UEFI System Utilities

127

Summary of Contents for HPE ProLiant DL365 Gen10 Plus Server


























































































































































































Search results

Summary of Contents for HPE ProLiant DL365 Gen10 Plus Server

Reviews:

Related manuals for HPE ProLiant DL365 Gen10 Plus Server

Brands by name

Popular brands

HP HPE ProLiant DL365 Gen10 Plus Server, Maintenance And Service Manual

Search results

Summary of Contents for HPE ProLiant DL365 Gen10 Plus Server

Reviews:

Related manuals for HPE ProLiant DL365 Gen10 Plus Server

Brands by name

Popular brands