manualshive.com logo in svg

HP HP EliteBook 1040 G1, Maintenance And Service Manual, Page: 67 / 124

Share
Download
HP HP EliteBook 1040 G1 Maintenance And Service Manual Download Page 67

Heat sink/fan assembly

NOTE:

The heat sink/fan assembly spare part kit includes replacement thermal material.

Description

Spare part number

Heat sink/thermal module with fans

739561-001

Before removing the heat sink/fan assembly, follow these steps:

1.

Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the

computer on, and then shut it down through the operating system.

2.

Disconnect the power from the computer by unplugging the power cord from the computer.

3.

Disconnect all external devices from the computer.

4.

Bottom cover (see 

Bottom cover on page 35

)

5.

Remove the battery (see 

Battery on page 41

), and then remove the following components:

Remove the heat sink/fan assembly:

1.

Disconnect both fan cables 

(1)

 

(2)

 from the system board.

2.

Loosen the captive Philllips screw from each fan 

(1)

.

3.

Following the sequence stamped into the heat sink, loosen the three captive Philllips screws 

(2)

 that

secure the heat sink to the system board.

Component replacement procedures

59

Summary of Contents for HP EliteBook 1040 G1





























































































































Reviews:

No comments