2.
Protection against vertically falling water drops when enclosure
tilted up to 15°
3.
Protected against spraying water
4.
Protected against splashing water
5.
Protected against water jets
6.
Protected against powerful water jets
7.
Protected against the effects of temporary immersion in water
8.
Protected against the effects of continuous immersion in water
NOTE:
When a characteristic numeral is not required to be specified,
it is replaced by the letter X (XX if both numerals are omitted).
Product features and components
Features
The display features include the following:
●
68.58 cm (27–inch) diagonal viewable area display with 2560 × 1440 resolution, plus full-screen
support for lower resolutions; includes custom scaling for maximum image size while preserving
original aspect ratio
●
Nonglare with an LED backlight
●
Wide viewing angle to allow viewing from a sitting or standing position, or moving from side to side
●
Integrated dual-band radio frequency identification (RFID) card reader
●
Integrated webcam, noise canceling microphone, and infrared (IR) sensors
●
Edge-to-edge anti-glare cover glass
●
IP32 on the front
●
Automatic backlight monitoring
●
Luminance uniformity
●
User calibration support provided by the HP Healthcare Edition DICOM Calibration Tool, available for
download at
http://www.hp.com/support
NOTE:
The calibration software must be used with either the X-Rite i1Display Pro or Klein K10–A
colorimeter.
●
Ambient light sensor
●
Image autorotation, which requires installation of the HP Image Auto-rotate Utility available at
http://www.hp.com/support
●
DisplayPort, USB Type-C Alt mode (DP 1.2), HDMI, and VGA video inputs
●
DisplayPort multi-stream support
●
Picture-in-picture (PIP) functionality to enable the HDMI, DisplayPort, USB Type-C, and VGA inputs to be
viewed in a small secondary window or side by side in the main window
●
Audio-out (headphone) jack
Product features and components
3
Summary of Contents for HC270cr
Page 1: ...User Guide HP HC270cr ...
Page 4: ...iv About This Guide ...
