HP H5100 Series User Manual Download

Page: 143 / 169

User’s Guide

10–16

Using the Fingerprint Reader (h5500 only)

6. Tap

OK.

7. Tap a finger to enroll.

8. Swipe the selected finger, as instructed.

✎

For more information on finger swiping, see the section
“Enrolling a Fingerprint” or tap the

Training

button.

9. Tap

OK.

10. Tap

Yes

to save changes.

Setting “Fingerprint-only” for Logon

In this mode, you are required to enter a successful fingerprint to
logon.

CAUTION:

In the event that an incorrect or unsuccessful fingerprint

is repeatedly or incorrectly entered, all data and applications stored
in RAM are erased and the iPAQ Pocket PC is returned to the
as-shipped configuration. It is recommended that you back up all
data frequently when using the security features.

1. From the

Today

screen, tap

Start

Settings

Password.

2. Select “fingerprint-only” from the down arrow list.

✎

If you are using ActiveSync, you must enter a password on your
personal computer to begin synchronization.

3. Tap the finger to enroll.

4. Swipe the selected finger as instructed.

✎

For more information on finger swiping, see the section
“Enrolling a Fingerprint” or tap the

Training

button.

5. Tap

OK.

6. Tap

Yes

to save changes.

Summary of Contents for H5100 Series










































































































































































Search results

Summary of Contents for H5100 Series

Reviews:

Related manuals for H5100 Series

Brands by name

Popular brands

HP H5100 Series, User Manual

Search results

Summary of Contents for H5100 Series

Reviews:

Related manuals for H5100 Series

Brands by name

Popular brands