HP G62 Series Maintenance And Service Manual Download

Page: 44 / 135

Removal and replacement procedures

Preliminary replacement requirements

Tools required

The following tools are needed to complete the removal and replacement procedures:

●

Flat-bladed screwdriver

●

Magnetic screwdriver

●

Phillips P0 and P1 screwdrivers

Service considerations

Before disassembly or assembly procedures, review and adhere to all service considerations.

NOTE:

As you remove each subassembly from the computer, place the subassembly (and all

accompanying screws) away from the work area to prevent damage.

Plastic parts

Using excessive force during disassembly and reassembly can damage plastic parts. Use care when
handling the plastic parts. Apply pressure only at the points designated in the maintenance
instructions.

Chapter 4 Removal and replacement procedures

Summary of Contents for G62 Series








































































































































Search results

Summary of Contents for G62 Series

Reviews:

Related manuals for G62 Series

Brands by name

Popular brands

HP G62 Series, Maintenance And Service Manual

Search results

Summary of Contents for G62 Series

Reviews:

Related manuals for G62 Series

Brands by name

Popular brands