HP G62 Series Maintenance And Service Manual Download

Page: 22 / 135

Left-side components

Component

Description

(1)

External monitor port

Connects an external VGA monitor or projector.

(2)

Vent

Enables airflow to cool internal components.

NOTE:

The computer fan starts up automatically to cool

internal components and prevent overheating. It is normal
for the internal fan to cycle on and off during routine
operation.

(3)

HDMI port (select models only)

Connects an optional video or audio device, such as a
high-definition television, or any compatible digital or audio
component.

NOTE:

Depending on the computer model, the computer

might include an HDMI port or a USB port at this location.

(4)

RJ-45 (network) jack

Connects a network cable.

(5)

USB ports (2)

Connects an optional USB devices.

(6)

Audio-in (microphone) jack

Connects an optional computer headset microphone,
stereo array microphone, or monaural microphone.

(7)

Audio-out (headphone) jack

Produces sound when connected to optional powered
stereo speakers, headphones, earbuds, a headset, or
television audio.

(8)

Digital Media Slot (select models only)

Supports the following optional digital card formats:

●

Memory Stick (MS)

●

Memory Stick Pro (MSP)

●

MultiMediaCard (MMC)

●

Secure Digital (SD) Memory Card

●

xD-Picture Card (XD)

(9)

Drive light

On—The hard drive is in use.

Chapter 2 External component identification

Summary of Contents for G62 Series








































































































































Search results

Summary of Contents for G62 Series

Reviews:

Related manuals for G62 Series

Brands by name

Popular brands

HP G62 Series, Maintenance And Service Manual

Search results

Summary of Contents for G62 Series

Reviews:

Related manuals for G62 Series

Brands by name

Popular brands