HP FB142AA Product Manual Download Page 21

Page: 21 / 149

Place the battery cover down and slide up until it locks into place.

Step 3: Charge the battery

CAUTION:

To avoid damaging your HP iPAQ or the AC adapter, make sure that all the metal

connectors are correctly aligned before connecting.

The battery provides power for your HP iPAQ to operate. Use the AC adapter to charge the battery
inside your HP iPAQ.

It takes approximately 2 to 4 hours to fully charge the battery for the first time. Charging might take more
time when the HP iPAQ is connected to a powered computer or with non-HP accessories.

To charge the battery:

Connect the AC adapter (input: 100-240VAC, 47-63Hz, output: 5VDC, 1A) to an electrical outlet.

Open the protective flap on the HP iPAQ.

Step 3: Charge the battery

Summary of Contents for FB142AA






















































































































































Search results

Summary of Contents for FB142AA

Reviews:

Related manuals for FB142AA

Brands by name

Popular brands

HP FB142AA, Product Manual

Search results

Summary of Contents for FB142AA

Reviews:

Related manuals for FB142AA

Brands by name

Popular brands