manualshive.com logo in svg

HP FB101AA - iPAQ Pocket PC Hx2490c, Additional Information, Page: 12 / 151

Share
Download
HP FB101AA - iPAQ Pocket PC Hx2490c Additional Information Download Page 12

2

Charging the Battery with the HP Desktop Cradle and 

AC Adapter

Use the HP Desktop Cradle to charge your Pocket PC.

NOTE: 

It is not necessary to synchronize your HP iPAQ before charging 

it.

To charge your HP iPAQ using the HP Desktop Cradle:

1.

Plug the AC Adapter into an electrical outlet and connect the other 

end of the AC Adapter to the AC connector on the HP Desktop 

Cradle.

2.

Slide the bottom of your HP iPAQ into the HP Desktop cradle and 

push firmly to seat it.

CAUTION: 

To avoid damaging your HP iPAQ or the cradle, check to be 

sure the HP iPAQ and cradle connectors are properly aligned before 

pushing the HP iPAQ into the HP Desktop Cradle.

NOTE: 

The amber charge light on the front of the HP iPAQ blinks while 

the battery is recharging and turns solid amber (nonblinking) when the 

battery is fully charged.

Continued

Summary of Contents for FB101AA - iPAQ Pocket PC Hx2490c
























































































































































Reviews:

No comments