HP f10, Troubleshooting Manual, Page: 66 / 72

Select Image to Update
Once the host settings are entered, either manually or automatically through DHCP, then click the
Refresh Image List button to make the applet query the FTP share for all XPe images whose
targeted BIOS families match the one of the current thin client system, and fill in the drop-list combo
box to the left of the button. You can choose any of the listed images to update/image the system.
When ready, you can click the Run Image Update Now button to proceed with the image update
using the selected image. A confirmation dialog similar to the following is displayed.
Click No to abort the operation. If you click Yes , the HP FTP Image Update Client confirms that the
flash drive has at least 200MB free to host the WinPE image. If the flash drive does not, the following
error message is displayed.
If the flash device has enough memory, the update client starts the download of the WinPE image,
modifies the boot loader to boot to WinPE in the next system restart, and then restarts the system to
continue to the WinPE phase.
Once WinPE is loaded, IBRPE is spawned to image the system’s flash drive using the selected image
from the FTP share. When the imaging completes, IBRPE automatically restarts the system to enter
the FBA phase.
58 Appendix D FTP Update