HP f10, Troubleshooting Manual, Page: 22 / 72

2. Slide the access panel toward the bottom of the unit until it is flush with the bottom of the chassis
(2).
3. Replace the secure compartment cover. For more information, see Replacing the Secure USB
Compartment Cover on page 11 .
Installing Thin Client Options
Various options can be installed on the thin client:
●
Installing the USB Device on page 14
●
Removing and Replacing the Battery on page 15
●
Installing a Secondary Flash Memory Module on page 17
●
External Drives on page 18
Installing the USB Device
Before beginning the replacement process, review General Hardware Installation Sequence
on page 6 for procedures you should follow before and after installing or replacing hardware.
▲ Insert the USB device into the USB port in the secure USB compartment. See the following
illustration for the location of the ports in the secure USB compartment.
Figure 2-10 USB ports in the secure USB compartment
14 Chapter 2 Hardware Changes