Power button board
Description
Spare part number
Power button board (includes cable)
807528-001
Before removing the power button board, follow these steps:
1.
Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect the power from the computer by unplugging the power cord from the computer.
3.
Disconnect all external devices from the computer.
4.
Remove the top cover (see
Top cover on page 26
).
5.
Remove the system board (see
System board on page 38
).
6.
Remove the display (see
Display assembly subcomponents on page 17
).
Remove the power button board:
1.
Remove the Phillips PM2.5×3.0 screw (1) that secures the power button board to the computer.
2.
Remove the power button board and cable (2).
Reverse this procedure to install the power button board.
56
Chapter 5 Removal and replacement procedures for Authorized Service Provider parts
Summary of Contents for ENVY x360 m6 Convertible
Page 4: ...iv Important Notice about Customer Self Repair Parts ...
Page 6: ...vi Safety warning notice ...
Page 10: ...x ...
