![background image](http://html.mh-extra.com/html/hp/envy-17-series/envy-17-series_maintenance-and-service-manual_2175023049.webp)
Before removing the system board, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then
unplugging the AC adapter from the computer.
4.
Remove the battery (see
5.
Remove the optical drive (see
6.
Remove the bottom cover (see
).
NOTE:
When replacing the system board, be sure that the following components are removed from
the defective system board and installed on the replacement system board:
●
Memory modules (see
●
WLAN module (see
●
Heat sink (see
)
●
Fan (see
Remove the system board:
1.
Position the computer upright, and then disconnect the following cables from the system board:
(1) ClickPad cable
(2) TouchPad cable
(3) Hard drive cable
(4) Optical drive cable
(5) Keyboard cable
(6) Power connector cable
(7) Display cable
(8) Speaker cable
(9) Power button board
HP Confidential
Component replacement procedures
41
Summary of Contents for Envy 17 Series
Page 4: ...HP Confidential iv Safety warning notice ...
Page 8: ...viii ...