![background image](http://html.mh-extra.com/html/hp/envy-17-series/envy-17-series_maintenance-and-service-manual_2175023050.webp)
2.
Remove the four Phillips PM2.0×3.0 screws (1) that secure the system board to the computer.
3.
Lift the right side of the system board (2) until the USB/audio board cable and connector are accessible.
4.
Disconnect the USB/audio board cable from the connector under the system board. See
for cable removal instructions.
5.
Remove the system board.
Reverse this procedure to install the system board.
HP Confidential
42
Chapter 6 Removal and replacement procedures for Authorized Service Provider parts
Summary of Contents for Envy 17 Series
Page 4: ...HP Confidential iv Safety warning notice ...
Page 8: ...viii ...