![background image](http://html.mh-extra.com/html/hp/envy-17-series/envy-17-series_maintenance-and-service-manual_2175023042.webp)
3.
Remove the WLAN module by pulling the module away from the slot at an angle (3).
NOTE:
If the WLAN antennas are not connected to the terminals on the WLAN module, the protective
sleeves must be installed on the antenna connectors, as shown in the following illustration.
Reverse this procedure to install the WLAN module.
HP Confidential
34
Chapter 6 Removal and replacement procedures for Authorized Service Provider parts
Summary of Contents for Envy 17 Series
Page 4: ...HP Confidential iv Safety warning notice ...
Page 8: ...viii ...