Memory module
Description
Spare part number
8-GB (PC3L, 12800, 1600-MHz)
693374-005
4-GB (PC3L, 12800, 1600-MHz)
691740-005
Before removing a memory module, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then
unplugging the AC adapter from the computer.
4.
Remove the battery (see
).
5.
Remove the optical drive (see
).
6.
Remove the bottom cover (see
Remove a memory module:
1.
Spread the retaining tabs (1) on each side of the memory module slot to release the memory module.
(The memory module tilts up.)
2.
Remove the memory module (2) by pulling it away from the slot at an angle.
Reverse this procedure to install a memory module.
HP Confidential
36
Chapter 6 Removal and replacement procedures for Authorized Service Provider parts
Summary of Contents for Envy 17 Series
Page 4: ...HP Confidential iv Safety warning notice ...
Page 8: ...viii ...