12 Specifications
Input power
The power information in this section may be helpful if you plan to travel internationally with the tablet.
The tablet operates on DC power, which can be supplied by an AC or a DC power source. The AC power source
must be rated at 100–240 V, 50–60 Hz. Although the tablet can be powered from a standalone DC power
source, it should be powered only with an AC adapter or a DC power source supplied and approved by HP for
use with this tablet.
The tablet can operate on DC power within the following specifications.
Input Power
Rating
Operating voltage and current
9 V DC @ 1.1A – 10W
NOTE:
This product is designed for IT power systems in Norway with phase-to-phase voltage not exceeding
240 V rms.
NOTE:
The tablet operating voltage and current can be found on the system regulatory label.
Operating environment
Factor
Metric
U.S.
Temperature
Operating (writing to optical disc)
5°C to 35°C
41°F to 95°F
Nonoperating
-20°C to 60°C
-4°F to 140°F
Relative humidity (noncondensing)
Operating
10% to 90%
10% to 90%
Nonoperating
5% to 95%
5% to 95%
Maximum altitude (unpressurized)
Operating
-15 m to 3,048 m
-50 ft to 10,000 ft
Nonoperating
-15 m to 12,192 m
-50 ft to 40,000 ft
EN 60601-1-2: 2007
The HP ElitePad 1000 G2 Healthcare Tablet needs special precautions regarding EMC and needs to be used
according to the EMC information provided in this document.
WARNING!
Portable and mobile RF communications equipment can affect the HP ElitePad 1000 G2
Healthcare Tablet.
Input power
59
