4.
Remove the optical drive
(3)
from the computer.
5.
If it is necessary to replace the optical drive bezel, use a thin tool or an unbent paper clip
(1)
to
release the optical drive tray.
6.
Use a flat-blade screw driver or similar tool to press on the optical drive bezel tab
(2)
, and then
release the left side of the optical drive bezel
(3)
.
7.
Remove the optical drive bezel
(4)
.
8.
If it is necessary to replace the optical drive bracket, position the optical drive with the rear panel
toward you.
9.
Remove the three Phillips PM2.0×3.0 screws
(1)
that secure the optical drive bracket to
the optical drive.
Component replacement procedures
85
