g.
Keyboard (see
Keyboard on page 101
)
h.
Base enclosure (see
Base enclosure on page 107
)
Remove the RJ-11 jack cable:
1.
Turn the base enclosure right-side up.
2.
Position the base enclosure with the front toward you.
3.
Release the RJ-11 jack from the clip
(1)
built into the base enclosure.
4.
Release the RJ-11 jack cable from the clips
(2)
and routing channel built into the base enclosure.
5.
Remove the RJ-11 jack cable.
Reverse this procedure to install the RJ-11 jack cable.
Component replacement procedures
113