Removing or replacing the service door
CAUTION:
To prevent information loss or an unresponsive system:
Save your work and shut down the computer before adding or replacing a memory module or hard
drive.
If you are not sure whether the computer is off or in Hibernation, turn the computer on by pressing the
power button. Then shut down the computer through the operating system.
Removing the service door
Remove the service door to access the battery, memory module slot, hard drive, regulatory label, and
other components.
To remove the service door:
1.
With the computer turned over, slide the service door release latch to the unlock position
(1)
.
and
(2)
remove the screw (if the optional screw is being used), or, if the screw is not in used,
simply slide the release latch to the right
(3)
.
NOTE:
If you want to use the optional security screw, it is stored inside the service door.
2.
Slide the service door towards the front of the computer
(4)
and lift to remove the service door
(5)
.
62
Chapter 10 Maintenance
Summary of Contents for EliteBook 820 G1
Page 1: ...Getting Started HP Notebook ...
Page 4: ...iv Safety warning notice ...
Page 10: ...x ...
