manualshive.com logo in svg

HP EliteBook 745 G2, Maintenance And Service Manual, Page: 87 / 172

Share
Download
HP EliteBook 745 G2 Maintenance And Service Manual Download Page 87

Card reader board

Description

Spare part number

Card reader board for use in HP EliteBook 745 models

768791-001

Card reader board for use in HP EliteBook 755 models

773960-001

Before removing the card reader board, follow these steps:

1.

Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn

the computer on, and then shut it down through the operating system.

2.

Disconnect the power from the computer by unplugging the power cord from the computer.

3.

Disconnect all external devices from the computer.

4.

Remove the following components:

a.

Service door (see 

Service door on page 47

)

b.

Battery (see 

Battery on page 49

)

c.

Fan (see 

Fan on page 74

)

d.

Keyboard (see 

Keyboard on page 58

)

e.

Base enclosure (see 

Internal base enclosure on page 68

)

Remove the card reader board:

1.

Disconnect the larger card reader cable 

(1)

 and the smaller touchpad cable 

(2)

 from the the card reader

board.

2.

Using a thin tool, pry up the left side of the board to disengage it from the top cover 

(3)

.

ENWW

Component replacement procedures

75

Summary of Contents for EliteBook 745 G2













































































































































































Reviews:

No comments