background image

4.

If you need to remove the microphone cable from the camera module, remove the screw (2), slide the 

privacy cover off the module (3), and then rotate the microphone module (4) to remove it from the 

bottom of the camera module (5).

Reverse this procedure to install the camera module, IR LED cable, and microphone cable.

Speakers with antennas

To remove the speakers with antennas, use this procedure and illustration.

Table 6-9

Speakers and antennas description and part number

Description

Spare part number

Antennas, WWAN

L67432-001

Antennas, WWAN

M51641-001

Speakers with WLAN antennas

M51638-001

Speakers with WWAN antennas

M51639-001

Speakers with GPS antennas

L67429-001

Speakers with WWAN antennas for HP INT XMM 7360 LTE w/GPS M.2

L70670-005

Before removing the speakers, follow these steps:

1.

Prepare the computer for disassembly (see 

Preparation for disassembly on page 40

).

2.

Remove the display assembly (see 

Display panel on page 42

).

Speakers with antennas

55

Summary of Contents for Elite x2 G8

























































































































































































Reviews: