HP Elite x2 G8 Maintenance And Service Manual Download

Page: 56 / 184

Remove the tape from the touch cable connector (5), and then disconnect the touch cable from the

system board (6).

Reverse this procedure to reassemble and replace the display panel.

Battery

To remove the battery, use this procedure and illustration.

Table 6-2

Battery description and part number

Description

Spare part number

Battery (2 cell, 47 Wh)

M51660-001

WARNING!

To avoid personal injury and damage to the product:

●

Do not puncture, twist, or crack the battery.

●

Do not cause an external puncture or rupture to the battery. They can cause a short inside the battery,

which can result in battery thermal runaway.

Chapter 6 Removal and replacement procedures for authorized service provider parts

Summary of Contents for Elite x2 G8

























































































































































































Search results

Summary of Contents for Elite x2 G8

Reviews:

Related manuals for Elite x2 G8

Brands by name

Popular brands

HP Elite x2 G8, Maintenance And Service Manual

Search results

Summary of Contents for Elite x2 G8

Reviews:

Related manuals for Elite x2 G8

Brands by name

Popular brands