HP Elite x2 G8 Page 53 Maintenance And Service Manual Download

Page: 53 / 184

Table 6-1

Display panel and back cover descriptions and part numbers (continued)

Description

Spare part number

Display panel, 3k × 2k

M51633-001

IMPORTANT:

Make special note of each screw size and location during removal and replacement.

IMPORTANT:

The display panel is fragile. Be sure to use no more force than necessary when removing the

panel.

IMPORTANT:

Cables connect the panel to the computer. Be careful not to disconnect the cables when

rotating the panel.

Be careful when opening to avoid tearing cables. Be sure to open from the top.

Before removing the display panel, follow these steps:

▲

Prepare the computer for disassembly (see

Preparation for disassembly on page 40

Remove the display panel:

Remove the two Torx T5 2.0 × 3.5 screws from each side of the kickstand (2).

Pull the sides of the kickstand away from the computer (2), and then remove the kickstand (3).

Display panel

Summary of Contents for Elite x2 G8

























































































































































































Search results

Summary of Contents for Elite x2 G8

Reviews:

Related manuals for Elite x2 G8

Brands by name

Popular brands

HP Elite x2 G8, Maintenance And Service Manual

Search results

Summary of Contents for Elite x2 G8

Reviews:

Related manuals for Elite x2 G8

Brands by name

Popular brands