HP Elite x2 G8 Maintenance And Service Manual Download

Page: 139 / 184

Table 7-55

POST error messages and user actions to address the error (continued)

Test description

Failure descriptions

Error code

Possible user actions

BIOS Application

BIOS Application Error 501

The BIOS installation might have become corrupted. Download the latest

version of the BIOS and install it. See

4. Update BIOS and drivers on page

for more information.

If reinstalling the BIOS fails, contact support for further assistance.

CMOS Recovery

Occurred

502

This message indicates that CMOS recovery was completed successfully.

No further action is required.

Battery Check

Primary Battery

Replace

601

This code indicates that the primary battery has very low capacity.

http://www.hp.com/support

for details about using the HP

Support Assistant to verify the battery capacity and, if necessary, order a

replacement.

Battery Check

Secondary Battery

Replace

602

This indicates that the secondary battery has very low capacity.

http://www.hp.com/support

for details about using the HP

Support Assistant to verify the battery capacity and, if necessary, order a

replacement.

Wireless Module

Not installed or

responding

701

Reseat the wireless LAN adapter module, if your notebook supports it.

Because seating or reseating a wireless LAN adapter is unique to each

computer model.

Fan

Fan not operating

correctly

90B

The system fan might be malfunctioning.

For information about troubleshooting heat-related issues, see

http://support.hp.com/us-en/document/c01007591

A hard reset can sometimes restore the system fan to working order. See

https://support.hp.com/us-en/document/c01684768

for details.

If the system fan continues to malfunction, contact support.

Routine maintenance for performance improvement

The table presents a summary of the suggested times for performing the routine maintenance tasks that are

described in this document.

Table 7-56

Routine maintenance tasks to improve performance

Tasks

Weekly

Monthly

Occasionally

Perform a system tune up.

Run Windows Update.

Scan for and remove viruses.

Scan for and remove spyware and adware.

Empty the Recycle Bin.

Delete temporary Internet files.

Back up user files.

Create a restore point.

Defragment the hard drive.

Routine maintenance for performance improvement

129

Summary of Contents for Elite x2 G8

























































































































































































Search results

Summary of Contents for Elite x2 G8

Reviews:

Related manuals for Elite x2 G8

Brands by name

Popular brands

HP Elite x2 G8, Maintenance And Service Manual

Search results

Summary of Contents for Elite x2 G8

Reviews:

Related manuals for Elite x2 G8

Brands by name

Popular brands