HP Edgeline EL1000 User Manual Download Page 100

Page: 100 / 164

Thermal configuration settings

Optimal Cooling

Provides the most efficient solution by configuring fan speeds to the minimum required to provide adequate cooling.

Enhanced CPU Cooling

Provides additional cooling to the processors, which can improve performance.

Increased Cooling

Operates fans at a higher speed.

Maximum Cooling

Provides the maximum cooling available for the system.

Acoustic Mode

Sets a maximum fan speed for the purpose of lowering fan noise. Using this configuration might result in processor throttling in

some workloads. This setting is not suitable for systems with GPUs.

This setting is supported on HPE Edgeline EL1000 systems with HPE ProLiant m750 Server Blades.

The thermal configuration setting overrides the minimum fan speed setting if the thermal configuration value is greater than the

minimum fan speed value.

Thermal configuration settings

100

Summary of Contents for Edgeline EL1000





































































































































































Search results

Summary of Contents for Edgeline EL1000

Reviews:

Related manuals for Edgeline EL1000

Brands by name

Popular brands

HP Edgeline EL1000, User Manual

Search results

Summary of Contents for Edgeline EL1000

Reviews:

Related manuals for Edgeline EL1000

Brands by name

Popular brands