manualshive.com logo in svg

HP E1351A, User Manual

The HP E1351A User Manual is a comprehensive guide for operating and troubleshooting the HP E1351A product. Available for download for free from manualshive.com, this manual equips users with detailed instructions, ensuring seamless usage and maximizing the potential of this exceptional device.

Share
Download
background image

Certification

Hewlett-Packard Company certifies that this product met its published specifications at the time of shipment from the factory.  Hewlett-
Packard further certifies that its calibration measurements are traceable to the United States National Institute of Standards and Tech-
nology (formerly National Bureau of Standards), to the extent allowed by that organization’s calibration facility, and to the calibration
facilities of other International Standards Organization members.

Warranty

This Hewlett-Packard product is warranted against defects in materials and workmanship for a period of three years from date of ship-
ment.  Duration and conditions of warranty for this product may be superseded when the product is integrated into (becomes a part of)
other HP products.  During the warranty period, Hewlett-Packard Company will, at its option, either repair or replace products which
prove to be defective.

For warranty service or repair, this product must be returned to a service facility designated by Hewlett-Packard (HP).  Buyer shall pre-
pay shipping charges to HP and HP shall pay shipping charges to return the product to Buyer.  However, Buyer shall pay all shipping
charges, duties, and taxes for products returned to HP from another country.

HP warrants that its software and firmware designated by HP for use with a product will execute its programming instructions when
properly installed on that product.  HP does not warrant that the operation of the product, or software, or firmware will be uninterrupted
or error free.

Limitation Of Warranty

The foregoing warranty shall not apply to defects resulting from improper or inadequate maintenance by Buyer, Buyer-supplied prod-
ucts or interfacing, unauthorized modification or misuse, operation outside of the environmental specifications for the product, or im-
proper site preparation or maintenance.

The design and implementation of any circuit on this product is the sole responsibility of the Buyer.  HP does not warrant the Buyer’s
circuitry or malfunctions of HP products that result from the Buyer’s circuitry.  In addition, HP does not warrant any damage that oc-
curs as a result of the Buyer’s circuit or any defects that result from Buyer-supplied products.

NO OTHER WARRANTY IS EXPRESSED OR IMPLIED.  HP SPECIFICALLY DISCLAIMS THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.

Exclusive Remedies

THE REMEDIES PROVIDED HEREIN ARE BUYER’S SOLE AND EXCLUSIVE REMEDIES.  HP SHALL NOT BE LIABLE
FOR ANY DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES, WHETHER BASED ON CON-
TRACT, TORT, OR ANY OTHER LEGAL THEORY.

Notice

The information contained in this document is subject to change without notice.  HEWLETT-PACKARD (HP) MAKES NO WAR-
RANTY OF ANY KIND WITH REGARD TO THIS MATERIAL, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WAR-
RANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.  HP shall not be liable for errors contained
herein or for incidental or consequential damages in connection with the furnishing, performance or use of this material.  This docu-
ment contains proprietary information which is protected by copyright.  All rights are reserved.  No part of this document may be photo-
copied, reproduced, or translated to another language without the prior written consent of Hewlett-Packard Company.  HP assumes no
responsibility for the use or reliability of its software on equipment that is not furnished by HP.

Restricted Rights Legend

Use, duplication or disclosure by the U.S. Government is subject to restrictions as set forth in subparagraph (c)(1)(ii) of the Rights in
Technical Data and Computer Software clause in DFARS 252.227-7013.

Hewlett-Packard Company
3000 Hanover Street
Palo Alto, California 94304  U.S.A.

Rights for non-DOD U.S. Government Departments and Agencies are as set forth in FAR 52.227-19 (c) (1,2).

HP E1351A, E1353A 16-Channel FET Multiplexer Modules User’s Manual

Edition 4

Copyright © 1995 Hewlett-Packard Company. All Rights Reserved.

HP E1351A, E1353A 16-Channel FET Multiplexer Modules User’s Manual    5

Summary of Contents for E1351A












































































































Reviews:

No comments

Related manuals for E1351A

PalmSens EmStat3-MUX16 Quick Start Manual preview
EmStat3-MUX16
Brand: PalmSens Pages: 13
Noise Engineering Quant Gemi Quick Start Manual preview
Quant Gemi
Brand: Noise Engineering Pages: 3
ETS-Lindgren HI-3702 User Manual preview
HI-3702
Brand: ETS-Lindgren Pages: 34
Solid V10 Quick Start Manual preview
V10
Brand: Solid Pages: 4
Wavetek Meterman LP10A Operator'S Manual preview
Meterman LP10A
Brand: Wavetek Pages: 16
Wavetek Meterman AD105 Operator'S Manual preview
Meterman AD105
Brand: Wavetek Pages: 20
Wavetek HD110B Operator'S Manual preview
HD110B
Brand: Wavetek Pages: 44
Giga-tronics ASCOR 7014 User Manual preview
ASCOR 7014
Brand: Giga-tronics Pages: 13
UNI-T UT70A Operating Manual preview
UT70A
Brand: UNI-T Pages: 30
Loviband SensoDirect 150 Instruction Manual preview
SensoDirect 150
Brand: Loviband Pages: 40
Turin Networks TE-50 User Manual preview
TE-50
Brand: Turin Networks Pages: 668
V&A MS8221 User Manual preview
MS8221
Brand: V&A Pages: 24
Daemyung WEBGATE TDM08-SDI-TX Manual preview
WEBGATE TDM08-SDI-TX
Brand: Daemyung Pages: 8
Gamry ECM8 Operator'S Manual preview
ECM8
Brand: Gamry Pages: 46
Raisecom RC3000E Product Description preview
RC3000E
Brand: Raisecom Pages: 91
Wavetek Meterman 220 Operator'S Manual preview
Meterman 220
Brand: Wavetek Pages: 44
Chauvin Arnoux C.A 5233 User Manual preview
C.A 5233
Brand: Chauvin Arnoux Pages: 138
Quintum CMS240 Release Note preview
CMS240
Brand: Quintum Pages: 1

Brands by name

Popular brands

Load more brands