HP E-MSM720 Reference Manual Download Page 119 | Manualshive

Page: 119 / 244

background image

CLI commands

Access Controller context

2-69

wispr login url

Supported on: MSM710 E-MSM720 MSM760 MSM765zl

wispr login url

<url>

Specifies the WISPr login url assigned to the controller.

no wispr login url

Deletes the WISPr login url assigned to the controller.

wispr logoff url

Supported on: MSM710 E-MSM720 MSM760 MSM765zl

wispr logoff url

<url>

Specifies the WISPr logoff url assigned to the controller.

no wispr logoff url

Deletes the WISPr logoff url assigned to the controller.

access-list

Supported on: MSM710 E-MSM720 MSM760 MSM765zl

access-list

<index>

<rule>

Adds a new rule to an access list at the specified index position.

no use access-list

Do not use an access list.

Parameters

index

Index position of the rule within the access list.

rule

Access list rule definition in the format:

<listname>

[,OPTIONAL],

<action>

,

<protocol>

,

<address>

,

<port>

[,

<accou

nt>

[,

<interval>

]]

<listname>

Specifies a name (up to 32 characters long) to identify the access list this
rule applies to. If a list with this name does not exist, a new list is created.
If a list with this name exists, the rule is added to it.

OPTIONAL

Allows the access list to be activated even if this rule fails to initialize. For
example, if you specify a rule that contains an address which cannot be
resolved for some reason, the other rules that make up the access list will
still be initialized. If you do not specify optional, a failed rule will cause the
entire list to fail. Critical access list definitions (such as for a remote login
page, certificates) should not use the OPTIONAL setting because if these
definitions fail to initialize there will be no indication in the log.

<action>

Specifies what action the rule takes when it matches incoming traffic. Two
options are available:

ACCEPT - Allow traffic matching this rule.

DENY - Reject traffic matching this rule.

WARN - Redirect traffic matching this rule to an error page.

<protocol>

Specify the protocol to check: tcp, udp, icmp, all

<address>

Specify one of the following:

«
...
117
118
119
120
121
...
»

Summary of Contents for E-MSM720





















































































































































































































































Reviews:

No comments

Related manuals for E-MSM720

Brand: 7bit Pages: 2

Brand: Jafar Pages: 15

C-NaviGator III

Brand: C-Nav Pages: 20

Brand: Walimex Pro Pages: 68

Brand: T&D Pages: 2

Brand: T&S Pages: 5

Brand: Paradox Pages: 3

Brand: Baier Pages: 20

Brand: Intellitec Pages: 16

Brand: Waterbird Pages: 19

963321-0403 - Cordless Precision Controller

Brand: Logitech Pages: 1

MOBA-Matic MMC-1000

Brand: MOBA Pages: 172

Brand: Vimar Pages: 8

Brand: Danfoss Pages: 36

Brand: Ascon tecnologic Pages: 4

Brand: GCE Pages: 13

Brand: Leviton Pages: 2

Brand: TECH Pages: 20

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands