CLI commands
Virtual AP context
2-114
no bandwidth default rates
Disables default bandwidth rates for this VAP (VSC).
bandwidth default rates maximum
Supported on: MSM710 E-MSM720 MSM760 MSM765zl
bandwidth default rates maximum
<max-tx-rate>
<max-rx-rate>
Sets the default maximum transmit and receive rates.
radius accounting realms
Supported on: MSM710 E-MSM720 MSM760 MSM765zl
radius accounting realms
Use RADIUS accounting realms.
no radius accounting realms
Do not use RADIUS accounting realms.
radius authentication realms
Supported on: MSM710 E-MSM720 MSM760 MSM765zl
radius authentication realms
Use RADIUS authentication realms.
no radius authentication realms
Do not use RADIUS authentication realms.
identify stations by ip only
Supported on: MSM710 E-MSM720 MSM760 MSM765zl
identify stations by ip only
Identify stations based on IP address only.
no identify stations by ip only
Do not identify stations based on address IP only.
location-aware group
Supported on: MSM710 E-MSM720 MSM760 MSM765zl
location-aware group
<name>
Sets the specified group name for the access point.
no location-aware group
Deletes the specified group name for the access point.
Summary of Contents for E-MSM720
