CLI commands
WAN IP interface context
2-95
end
Supported on: MSM710 E-MSM720 MSM760 MSM765zl
end
Switches to parent context.
pppoe auto-reconnect
Supported on: MSM710 E-MSM720 MSM760 MSM765zl
pppoe auto-reconnect
The controller will automatically attempt to reconnect if the connection is lost.
no pppoe auto-reconnect
The controller will not automatically attempt to reconnect if the connection is lost.
pppoe mru
Supported on: MSM710 E-MSM720 MSM760 MSM765zl
pppoe mru
<bytes>
Specifies the maximum receive unit.
Changes to this parameter should only be made according to the recommendations of your ISP.
Incorrectly setting this parameter can reduce the throughput of your Internet connection.
Parameters
<bytes>
Maximum size (in bytes) of a PPPoE packet when receiving. Range: 500 -
1500 bytes.
pppoe mtu
Supported on: MSM710 E-MSM720 MSM760 MSM765zl
pppoe mtu
<bytes>
Specifies the maximum transmit unit.
Changes to this parameter should only be made according to the recommendations of your ISP.
Incorrectly setting this parameter can reduce the throughput of your Internet connection.
Parameters
<bytes>
Maximum size (in bytes) of a PPPoE packet when transmitting. Range: 500
- 1500 bytes.
pppoe unnumbered
Supported on: MSM710 E-MSM720 MSM760 MSM765zl
pppoe unnumbered
Enable unnumbered mode.
no pppoe unnumbered
Disable unnumbered mode.
Summary of Contents for E-MSM720
