manualshive.com logo in svg

HP Dv4 1140go - Pavilion Entertainment - Core 2 Duo GHz, Maintenance And Service Manual

Share
Download
HP Dv4 1140go - Pavilion Entertainment - Core 2 Duo GHz Maintenance And Service Manual Download Page 3

Safety warning notice

WARNING!

To reduce the possibility of heat-related injuries or of overheating the computer, do not

place the computer directly on your lap or obstruct the computer air vents. Use the computer only on a
hard, flat surface. Do not allow another hard surface, such as an adjoining optional printer, or a soft
surface, such as pillows or rugs or clothing, to block airflow. Also, do not allow the AC adapter to contact
the skin or a soft surface, such as pillows or rugs or clothing, during operation. The computer and the
AC adapter comply with the user-accessible surface temperature limits defined by the International
Standard for Safety of Information Technology Equipment (IEC 60950).

iii

Summary of Contents for Dv4 1140go - Pavilion Entertainment - Core 2 Duo GHz











































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands