manualshive.com logo in svg

HP Dv4 1140go - Pavilion Entertainment - Core 2 Duo GHz, Maintenance And Service Manual

Share
Download
HP Dv4 1140go - Pavilion Entertainment - Core 2 Duo GHz Maintenance And Service Manual Download Page 180

Create a system restore point

1.

Select 

Start

 

>

 

Control Panel

 

>

 

System and Maintenance

 

>

 

System

.

2.

In the left pane, click 

System Protection

.

3.

Click the 

System Protection

 tab.

4.

Under 

Automatic restore points

, select the disk for which you want to create a restore point.

5.

Click 

Create

.

The System Protection window opens.

6.

Follow the on-screen instructions.

Restore to a previous date and time

To revert to a restore point (created at a previous date and time), when the computer was functioning
optimally, follow these steps:

1.

Select 

Start

 

>

 

Control Panel

 

>

 

System and Maintenance

 

>

 

System

.

2.

In the left pane, click 

System protection

.

3.

Click the 

System Protection

 tab.

4.

Click the 

System Restore

 button, and then click 

Next

.

The System Restore window opens.

5.

Follow the on-screen instructions.

172 Chapter 8   Backup and recovery

Summary of Contents for Dv4 1140go - Pavilion Entertainment - Core 2 Duo GHz











































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands