English
21
Installing Your HP Fax Modem
Step 3: Installing the Drivers
9
Enter your area dialing code and country. Also, complete
the necessary information under
How I dial from this
location
, for example, enter “0” in the appropriate field if
you need to dial zero to get an outside line.
10
Once completed, click
OK
then
Close
.
To verify the modem installation, refer to the instructions
on page 22.
In Windows NT 4.0
NOTE
For Windows NT 4.0, ensure that Plug and Play is
disabled
in
your PC’s BIOS
Setup
program.
To do this, enter the PC’s BIOS
Setup
program by pressing
F2
during startup and set
PnP Operating System
to
No
. (Your
PC’s BIOS
Setup
program may differ from this).
1
Once your computer has started, insert the Windows NT
4.0 Drivers disk into the floppy disk drive.
2
Click the
Start
button, then click
Run
.
3
Enter “
A:\setup.exe
” (where
A:
is the letter of your
floppy disk drive) and click
OK
.
4
The Modem Board Installation Wizard is launched. This will
guide you through the installation of the HP Fax Modem
drivers.
5
Once completed, click the
Start
button then click
Settings
Control Panel
.
6
In the
Control Panel
, double-click the
Modems
icon.
7
Click the
Dialing Properties
button.
8
Enter your area dialing code and country. Also, complete
the necessary information under
How I dial from this
location
, for example, enter “0” in the appropriate field if
you need to dial zero to get an outside line.
modem.bk : modem2.fb4 Page 21 Thursday, November 26, 1998 5:21 PM
Summary of Contents for D7808A
