HP Compaq tc4400 Reference Manual Download Page 50

Page: 50 / 95

Embedded Security for ProtectTools

Reference Guide

4–11

Permanently disabling Embedded Security

To permanently disable Embedded Security:

1. Select

Start > All Programs > HP ProtectTools Security

Manager

2. In the left pane, select

Embedded Security

, and then select

Advanced

3. In the right pane, under

Embedded Security

, click

Disable

4. Enter your owner password at the prompt, and then click

Enabling Embedded Security after permanent
disable

To enable Embedded Security after permanently disabling it:

1. Select

Start > All Programs > HP ProtectTools Security

Manager

2. In the left pane, select

Embedded Security

, and then select

Advanced

3. In the right pane, under

Embedded Security

, click

Enable

4. Enter your owner password at the prompt, and then click

Migrating keys with the Migration Wizard

Migration is an advanced administrator task that allows the
management, restoration, and transfer of keys and certificates.

For details on migration, refer to the Embedded Security
online Help.

Summary of Contents for Compaq tc4400
































































































Search results

Summary of Contents for Compaq tc4400

Reviews:

HP Compaq tc4400, Reference Manual, Page: 50 / 95

Search results

Summary of Contents for Compaq tc4400

Reviews: