manualshive.com logo in svg

HP Compaq tc4400, Reference Manual, Page: 10 / 95

Share
Download
HP Compaq tc4400 Reference Manual Download Page 10

Introduction

Reference Guide

1–5

Smart card administrator 
password

✎

Also known as BIOS 
administrator card 
password.

Smart Card Security,

by IT administrator

Used for smart card 
power-on (BIOS) 
authentication. Allows 
access to the Computer 
Setup utility and the 
computer contents when 
the computer is turned 
on, restarted, or restored 
from hibernation. It also 
allows for creating 
recovery files to restore 
user or administrator 
cards.

Smart card user password

✎

Also known as BIOS 
user card password.

Smart Card Security 

Used for smart card 
power-on (BIOS) 
authentication.

Allows access to the 
computer contents when 
the computer is turned 
on, restarted, or restored 
from hibernation. 

Smart card PIN 

Smart Card Security

Protects access to the 
smart card contents and 
authenticates users of 
the smart card.
When used for power-on 
authentication, the smart 
card PIN also protects 
access to the Computer 
Setup utility and to the 
computer contents.

Smart card recovery file 
password

Smart Card Security

Protects access to the 
recovery file that 
contains the BIOS 
passwords. 

(Continued)

ProtectTools Password

Set in this 
ProtectTools Module

Function

Summary of Contents for Compaq tc4400
































































































Reviews:

No comments