manualshive.com logo in svg

HP Compaq t5730, User Manual

Share
Download
HP Compaq t5730 User Manual Download Page 242

14020232

 Required file update.ini not found on writable.

14020242

 Required parameters missing in update.ini.

14020252

 None of the specified network interfaces could be configured.

14020262

 Not enough space on the target partition.

14020272

 The target partition is too large for the specified image.

14020282

 Could not access the specified URL.

14020292

 Streaming data to flash error.

14020302

 Cloning error.

14020312

 Failed to obtain return code from returned update file from cloning.

14020322

 Failed to obtain return code from returned update file from cloning.

14020402

 FTPException unknown error.

14020412

 File or directory not found.

14020422

 Get file error.

14020432

 Read reply error.

14020442

 Set PASV error.

14020452

 Init reply error.

14020462

 Change directory error.

14020472

 Delete file error.

14020482

 List directory error.

14020492

 Get resume error.

14020502

 User not accepted.

14020512

 Password not accepted.

14020522

 Create directory error.

14020532

 Finish put error.

14020542

 TypeI error.

14020552

 Put file error.

14020562

 Get finish error.

14020572

 Remove directory error.

14020582

 FTP quit error.

14020592

 PWD error.

14020602

 Connect error.

232 Appendix C   Error Code Reference

Summary of Contents for Compaq t5730
































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands