HP Compaq t5730 User Manual Download Page 177

Page: 177 / 255

In the

Configuration Management

dialog box, select

User Authentication

in the left pane.

In the

Host

field, type the LDAP server hostname or IP address. If an encrypted connection will be

used, the LDAP server must be specified by the hostname.

Adjust the

Port

, if necessary. Port 389 is the most common port with TLS or Unencrypted LDAP

connections. Port 636 is the port commonly used for a SSL LDAP connection.

Select an

Encryption

type.

If a TLS or SSL encryption is in use, a

Host Key

must be specified. Do one of the following:

▲

Click

Get Key From Host

. A connection will be created to the LDAP server, and the Host Key

will be saved.

▲

Click

Import From File

. Browse to the Host Key certificate file (in one of the following formats):

●

Key Export File: Host keys can often be exported to a file from the LDAP server. For the
Microsoft Active Directory/IIS platform, this Export File can be obtained from

http://

<your-ldap-server>>/certsrv/certcarc.asp

●

Java Keystore: A hpdmcert.key file from a previous HP Device Manager installation, or
other Java Keystore file, can be imported.

In the

Server Type

section, choose a LDAP server type from the

Type

menu.

Active Directory

: Specify the Active Directory

Domain

. Only a single Domain is supported.

Generic LDAP

User Management 167

Summary of Contents for Compaq t5730
































































































































































































































































Search results

Summary of Contents for Compaq t5730

Reviews:

Brands by name

Popular brands

HP Compaq t5730, User Manual

Search results

Summary of Contents for Compaq t5730

Reviews:

Brands by name

Popular brands