Solving Hard Drive Problems
Table D-4
Solving Hard Drive Problems
Hard drive error occurs.
Cause
Solution
Hard disk has bad sectors or has failed.
1.
In Microsoft Windows XP, right-click
Start
, click
Explore
, and select a drive. Select
File
>
Properties
>
Tools
. Under
Error-checking
, click
Check Now
.
In Microsoft Windows Vista, right-click
Start
, click
Explore
, and right-click on a drive. Select
Properties
then select the
Tools
tab. Under
Error-
checking
click
Check Now
.
2.
Use a utility to locate and block usage of bad sectors. If
necessary, reformat the hard disk.
Disk transaction problem.
Cause
Solution
Either the directory structure is bad or there is a problem with
a file.
In Microsoft Windows XP, right-click
Start
, click
Explore
, and
select a drive. Select
File
>
Properties
>
Tools
. Under
Error-
checking
, click
Check Now
.
In Microsoft Windows Vista, right-click
Start
, click
Explore
,
and right-click on a drive. Select
Properties
then select the
Tools
tab. Under
Error-checking
click
Check Now
.
Drive not found (identified).
Cause
Solution
Cable could be loose.
Check cable connections.
The system may not have automatically recognized a newly
installed device.
See reconfiguration directions in the
Solving Hardware
Installation Problems on page 259
section. If the system still
does not recognize the new device, check to see if the device
is listed within Computer Setup. If it is listed, the probable
cause is a driver problem. If it is not listed, the probable cause
is a hardware problem.
If this is a newly installed drive, run the Computer Setup utility
and try adding a POST delay under
Advanced
>
Power-On
.
The device is attached to a SATA port that has been hidden in
Computer Setup.
Run the Computer Setup utility and ensure
Device Available
is selected for the device's SATA port in
Security
>
Device
Security
.
Drive responds slowly immediately after power-up.
Run Computer Setup and increase the POST Delay in
Advanced
>
Power-On Options
.
Solving Hard Drive Problems 247
