Front Bezel Security
The front bezel can be locked in place by installing a security screw provided by HP.
The security screw is located on the fan duct inside the chassis. To lock the front bezel, remove the
security screw from the fan duct
(1)
and install it through the chassis frame into the front bezel
(2)
.
Figure 8-8
Installing the Front Bezel Security Screw
Computer Access Panel
1.
Prepare the computer for disassembly (
Preparation for Disassembly on page 118
).
2.
Press the buttons on the left and right sides of the computer
(1)
then slide the access panel back
until it stops and lift it up and off the chassis
(2)
.
Figure 8-9
Removing the Access Panel
To install the access panel, reverse the removal procedure.
Computer Access Panel 125
