HP Compaq dc7900 Business PC Service & Reference Manual Download Page 243

Page: 243 / 300

Control panel message

Description

Recommended action

2200-PMM Allocation Error during MEBx
Download

Memory error during POST execution of the
Management Engine (ME) BIOS Extensions
option ROM.

Reboot the computer.

Unplug the power cord, re-seat the
memory modules, and reboot the
computer.

If the memory configuration was
recently changed, unplug the computer,
restore the original memory
configuration, and reboot the computer.

If the error persists, replace the system
board.

2201-MEBx Module did not checksum
correctly

Memory error during POST execution of the
Management Engine (ME) BIOS Extensions
option ROM.

Reboot the computer.

Unplug the power cord, re-seat the
memory modules, and reboot the
computer.

If the memory configuration was
recently changed, unplug the power
cord, restore the original memory
configuration, and reboot the computer.

If the error persists, replace the system
board.

2202-PMM Deallocation Error during MEBx
cleanup

Memory error during POST execution of the
Management Engine (ME) BIOS Extensions
option ROM.

Reboot the computer.

Unplug the power cord, re-seat the
memory modules, and reboot the
computer.

If the memory configuration was
recently changed, unplug the power
cord, restore the original memory
configuration, and reboot the computer.

If the error persists, replace the system
board.

2203-Setup error during MEBx execution

MEBx selection or exit resulted in a setup
failure.

Reboot the computer.

Unplug the power cord, re-seat the
memory modules, and reboot the
computer.

If the memory configuration was
recently changed, unplug the power
cord, restore the original memory
configuration, and reboot the computer.

If the error persists, replace the system
board.

2204-Inventory error during MEBx execution BIOS information passed to the MEBx

resulted in a failure.

Reboot the computer.

If the error persists, update to the latest
BIOS version.

If the error still persists, replace the
system board.

Table C-1

Numeric Codes and Text Messages (continued)

POST Numeric Codes and Text Messages 231

Summary of Contents for Compaq dc7900 Business PC













































































































































































































































































































Search results

Summary of Contents for Compaq dc7900 Business PC

Reviews:

HP Compaq dc7900 Business PC, Service & Reference Manual, Page: 243 / 300

Search results

Summary of Contents for Compaq dc7900 Business PC

Reviews: