HP Compaq CQ58 Maintenance And Service Manual Download

Page: 99 / 136

Remove the Phillips PM2.0×3.0 screw

(3)

that secures the fan to the system board.

Remove the fan/heat sink assembly

(4)

NOTE:

Due to the adhesive quality of the thermal material located between the heat sink and system

board components, it may be necessary to move the heat sink from side to side to detach it.

NOTE:

The following illustration shows the fan/heat sink assembly removal process on a computer model

equipped with an AMD processor.

NOTE:

The following illustration shows the fan/heat sink assembly removal process on a computer model

equipped with an Intel processor and a graphics subsystem with discrete memory.

ENWW

Component replacement procedures

Summary of Contents for Compaq CQ58









































































































































Search results

Summary of Contents for Compaq CQ58

Reviews:

Related manuals for Compaq CQ58

Brands by name

Popular brands

HP Compaq CQ58, Maintenance And Service Manual

Search results

Summary of Contents for Compaq CQ58

Reviews:

Related manuals for Compaq CQ58

Brands by name

Popular brands